In this video I will try to Solve Honda Activa Starting Problem, if you have still not subscribed to my channel then you are losing out on lots of money for A lot of you honda guys & gals have issues with these ES model honda, Ranchers, Foremans, Rubicons,Recons & Ranchers. Here’s your fix. Stop selling your Ho Page 41 Starting the Engine (Continued) Place the vehicle on its centre stand. Turn the ignition switch to the ON position. To Start the Engine with Electric Starter With the throttle closed, press the start button. Squeeze the rear brake lever. Release the start button as soon as the engine starts SCV125 ID The starter motor will only work when Step 2. The only wire you need to worry about is the black with white stripe (B/W). It goes from the stator, splits and goes to the coil and the points. It also goes to the kill switch and the key switch, but you should have already tried unplugging both the key switch and kill switch to rule them out. Honda designed and engineered, for you and your Honda. Please note: Prices include VAT, but do not include fitting. Issue date: 04/2018 Terms and Conditions apply. Please ask a salesperson for full details. *2 year warranty only available when purchased with a new Honda motorcycle, otherwise 12 months. Please ask your local Dealer for advice on 4. Have had a new SH 125 for 2 week from main dealer, whilst my bike is serviced. The plus side of this bike are a free rear box, low weight, maneuverability and handling at low speed. The minus sides are 6 litre tank that will give you a maximum range of around 120 miles (depending on driving style). No side stand. PCX starting problem solved. Hi all, just a quick heads up to any out there that may experience the same problem I had recently. For some time now starting my PCX has been a pain and required a real squeeze on the brake lever and many attempts on the starter button to get it going. I called into Honda who simply charged up the battery but this Location: Marine City, Michigan. Re: SH125 cut out and water issue. by TommyXP » Mon Jul 17, 2017 12:52 pm. Before considering anything else; it sounds to me like an air-bleeding issue when changing the coolant. On the 2010SH there is a small bolt atop the thermostat housing that MUST be removed when re-filling the radiator; until liquid pours V0B5aw.

honda sh 125 starting problems